Meer info over de Feuerwand Brokat-Rotblinker:
Importeur: Funke
Artikel nummer: FFC-GOLD-3
Netto kruitgewicht: 500 gram per fontein.
Kaliber: 30 mm
Tijdsduur: 20 seconden
Karton eenheid: 6/1
Effect beschrijving:
After the "Feuerfächer", singlerows of mines, this one are now singlerows of 5 fountains in the diameter of our well known "Cracker-Fontänen". A short, but intense wall of fire with 500g powderweight. In my imagination, such items could be used at various types of fireworks shows at an elevated position near the viewers - if it also works like this in reality we shall see, as I don´t shoot fireworks shows by myself, so might lack the experience there.
Sadly my colleagues in china did not put the item in an elevated position for filming, which should always be done at such fountains, as then the effect looks much better.
Regarding to the effect of this particular type, it´s quite nice, already known from our "Riesenfontäne 4", but sadly it is not so constantly burning. The reason for this is that the fountains are only pressed 2 times by the factory - even though fountains in such size would have to be pressed much more often. But almost noone here is doing this, as the cost would be much higher then. So it would be better, but the factory which produced these fountains didn´t want to do it (and another factory before had already canceled this order), so I thought that the shaped effect is still always full enough of effect, and it is better in the end to produce it like this than having nothing done at all.
If we will make the next batch the same way again, or I find a new factory which will make it for a higher price with a more even burn rate - we will have to see.
Importeur: Funke
Artikel nummer: FFC-GOLD-3
Netto kruitgewicht: 500 gram per fontein.
Kaliber: 30 mm
Tijdsduur: 20 seconden
Karton eenheid: 6/1
Effect beschrijving:
After the "Feuerfächer", singlerows of mines, this one are now singlerows of 5 fountains in the diameter of our well known "Cracker-Fontänen". A short, but intense wall of fire with 500g powderweight. In my imagination, such items could be used at various types of fireworks shows at an elevated position near the viewers - if it also works like this in reality we shall see, as I don´t shoot fireworks shows by myself, so might lack the experience there.
Sadly my colleagues in china did not put the item in an elevated position for filming, which should always be done at such fountains, as then the effect looks much better.
Regarding to the effect of this particular type, it´s quite nice, already known from our "Riesenfontäne 4", but sadly it is not so constantly burning. The reason for this is that the fountains are only pressed 2 times by the factory - even though fountains in such size would have to be pressed much more often. But almost noone here is doing this, as the cost would be much higher then. So it would be better, but the factory which produced these fountains didn´t want to do it (and another factory before had already canceled this order), so I thought that the shaped effect is still always full enough of effect, and it is better in the end to produce it like this than having nothing done at all.
If we will make the next batch the same way again, or I find a new factory which will make it for a higher price with a more even burn rate - we will have to see.
